High grade copper, silver and indium at Copper Hills
Released
Released
Announcement PDF
ASX code:GG1 Contact: Quentin Hill – Managing Director
Web: greengoldminerals.com.au Email: qhill@greengoldminerals.com
GREEN & GOLD MINERALS
Page 1
High grade copper, silver and indium at Copper Hills
➢ Drilling to commence at Copper Hills in May.
➢ High grade historic drill results at Copper Hills released for the first time include1:
o 4m at 139 g/t Ag, 1.3% Cu, 4.3% Zn, 1.1% Pb from 101m (PDH7)
o 10m at 50 g/t Ag, 0.9% Cu, 2.5% Zn, 1.5% Pb from 28m (PDH8)
o 3m at 91 g/t Ag, 2.3% Cu, 1.1% Zn, 0.6% Pb from 46m (PDH4)
➢ High grade indium, silver & copper in XRF analysis2 of dump samples at Copper Hills:
o 4.8% Cu, 454 g/t In, 63 g/t Ag, 0.3% Sn in sample X003
o 17.3% Cu, 421 g/t Ag, 225 g/t In in X016
o 486 g/t Ag, 774 g/t In, 1.9% Cu in X021A
o 35.3% Cu, 281 g/t In, 60 g/t Ag in X025
➢ The Penang Pekin historic mines also returned strong XRF results including:
o 7.6% Cu, 304 g/t In, 188 g/t Ag in X032
o 29.7% Cu, 47 g/t Ag, 74 g/t In in X033
o 5.9% Cu, 134 g/t Ag, 107 g/t In in X040
➢ The new results from recent reconnaissance and historic reports confirm the high
prospectivity and potential of the Herberton Conductor Metals Project.
➢ GG1’s tenements are in the copper-silver dominant zone of the Herberton mineral field
that is also famous for tin mining.
➢ The Herberton Conductor Metals Project focus is on copper, silver, tin and indium which
are forward facing commodities leveraged to electrification and AI.
➢ Drilling is planned at Copper Hills in May before moving to Chillagoe to test gold targets
at Sentinel and Mt Wandoo.
1 Open file historic drilling is reproduced in this announcement to disclose the metals present and the potential
for the continuity of mineralisation at depth. Investors should not rely on unverified historic drilling results when
estimating the average grade or quantity of the mineralisation.
2 Portable XRF analysis is a spot measurement, intended to identify the metals that are present, but not the
insitu average concentration of those metals. Investors should be aware that portable XRF readings from
selected samples do not represent the average insitu grade of the mineralisation.
ASX Announcement
27 April 2026
ASX code:GG1 Contact: Quentin Hill – Managing Director
Web: greengoldminerals.com.au Email: qhill@greengoldminerals.com
GREEN & GOLD MINERALS
Page 2
Exploration Update: Herberton Conductor Metals Project
Green & Gold Minerals Limited (ASX: GG1) is pleased to provide an exploration update from the
Herberton Conductor Metals Project. GG1 is exploring for a stand-alone large tonnage copper, silver, tin
and indium resource, or group of resources in this well-endowed district.
The geology team commenced work immediately following approval of the Herberton Conductor Metals
Project acquisition at the EGM held on 17 April 2026. Restoration of the old mining access roads has
begun with Copper Hills completed and work on high-priority prospects at Mt Gossan, Siberia, and
Elizabeth Bluffs underway.
The Herberton area is best known for historic tin mining, however the mineral field also contains a large
copper and silver dominant zone in which GG1’s tenements are located, and a separate silver, lead
and zinc dominant zone (Figure 1). The silver, lead, and zinc zone has been successfully explored by
Iltani and Dover Castle, each defining large, nationally significant silver-lead-zinc-indium resources.
GG1 sees similar opportunity in the copper-silver zone and aims to replicate the exploration success of
neighbouring companies while focussing on copper, silver, indium and tin, which are leveraged to
electrification and AI.
Figure 1 The Herberton Conductor Metals Project location showing prospects and nearby
significant mineral resource locations.
ASX code:GG1 Contact: Quentin Hill – Managing Director
Web: greengoldminerals.com.au Email: qhill@greengoldminerals.com
GREEN & GOLD MINERALS
Page 3
The copper-silver prospects within GG1’s tenure remain virtually unexplored in the modern era. High-
grade historic drill and rock chip results indicate potential to define significant copper, silver, indium,
and tin resources.
The Mt Gossan, Siberia, Copper Hills, and Elizabeth Bluffs mining centres are GG1’s highest-priority
targets.
Reconnaissance sampling detailed in this announcement at Copper Hills and Penang Pekin has
demonstrated the presence of high-grade copper, silver, and indium based on portable XRF
measurements. Rock chip samples have also been submitted for gold analysis.
Copper Hills
Copper Hills comprises a group of historic copper and silver mines that were worked from the late
1800s to the early 1900s. Reconnaissance sampling and mapping were conducted by GG1 in
preparation for drilling at Copper Hills.
Portable XRF readings reported in this announcement were taken from samples collected from the
mine dumps. In addition, rock chip samples from the mine dumps have been collected and submitted
for laboratory analysis. The XRF results consistently confirm the presence of copper (up to 35%), silver
(up to 486 g/t), and indium (up to 774 g/t) as the main metals of economic interest at Copper Hills.
Historic Drilling
Two historic drill hole collars were located at Copper Hills, dating from work completed in 1979–1980.
The report relating to these drill holes was recently made open file following a request by GG1. The
historic report contains information for 11 holes drilled by Ocean Resources in 1979–1980.
Figure 1 Examples of rocks from the Copper Hills mine dumps containing malachite and azurite
(copper carbonate).
ASX code:GG1 Contact: Quentin Hill – Managing Director
Web: greengoldminerals.com.au Email: qhill@greengoldminerals.com
GREEN & GOLD MINERALS
Page 4
Drill hole collar coordinates are available for only 4 of the 11 holes with the remainder targeting lodes
in the area identified by the white rectangle in Figure 2 below.
The historic drilling confirms that copper and silver are the main metals of interest at Copper Hills with
accessory zinc and lead in drilling and the presence of indium suggested by portable XRF readings in
rock chips. Drill intercepts are mostly below the base of weathering, confirming continuity of the
mineralisation below the historically mined oxide zone.
Investors are advised that the historic drill results have not been validated, and the locations and
orientations of some drill holes are unknown. Accordingly, these results should not be relied upon to
estimate the quantity or average grade of mineralisation. The drill results are reproduced in this
announcement to provide complete and balanced reporting on the presence of target metals at
Copper Hills. The historic drill results are unsuitable for use in any future resource estimate.
The historic drill assay results are reported as significant assay intervals in historic reports, and
complete 1 m interval assays are not available. The cut-off grade used to calculate the reported
significant intervals is not known.
Figure 2 Copper Hills Drill and XRF results with vein orientations and the vegetation anomaly
overlain.
ASX code:GG1 Contact: Quentin Hill – Managing Director
Web: greengoldminerals.com.au Email: qhill@greengoldminerals.com
GREEN & GOLD MINERALS
Page 5
The depth of weathering was estimated to be 30m by Ocean Resources in 1979 (Grieves, G, 1980).
Historic drill intercepts are mostly below the base of weathering and confirm the continuity of copper
and silver mineralisation into fresh rock at depth.
The reported intersections from the Ocean Resources drilling (Grieves, G, 1980) are reproduced below:
PDH1: 1m at 11 g/t Ag, 0.7% Cu, 0.2% Zn, 0.1% Pb from 49m, and
2m at 40g/t Ag, 0.6% Cu, 0.2% Zn from 69m (Copper Hills)
PDH2: NSI,
PDH3: NSI
PDH4: 3m at 91g/t Ag, 2.3% Cu, 1.1% Zn, 0.6% Pb from 46m (Copper Hills)
PDH5: 4m at 29 g/t Ag, 0.1% Cu, 2.5% Zn, 0.7% Pb from 100m (Copper Hills)
PDH6: 1m at 30 g/t Ag, 0.1% Cu, 3.0% Zn, 1.0% Pb from 53m, and
2m at 53 g/t Ag, 0.5% Cu, 2.7% Zn, 0.8% Pb from 74m (Copper Hills)
PDH7: 2m at 21 g/t Ag, 0.1% Cu, 2.4% Zn, 0.9% Pb from 25m, and
1m at 11 g/t Ag, 0.1% Cu, 1.2% Zn, 0.4% Pb from 33m, and
4m at 139 g/t Ag, 1.3% Cu, 4.3% Zn, 1.1% Pb from 101m (Copper Hills)
PDH8: 10m at 50 g/t Ag, 0.9% Cu, 2.5% Zn, 1.5% Pb from 28m (Copper Hills)
SR1: NSI (Copper Hills West)
SR2: 28m at 8g/t Ag, 0.14% Cu, 0.15% Zn from 34m (SR2) (Copper Hills West)
SR3: Not assayed (Copper Hills West)
HoleID Prospect Easting Northing Depth Azimuth Dip
SR1 Copper Hills West 291,389 8,072,913 77 38 -70
SR2 Copper Hills West 291,478 8,072,601 94 7 -60
SR3 Copper Hills West 291,474 8,072,506 50 7 -60
PDH1 Copper Hills unknown 80 -60
PDH2 Copper Hills unknown 80 -60
PDH3 Copper Hills unknown 60 -60
PDH4 Copper Hills 291,976 8,072,618 60 57 -75
PDH5 Copper Hills unknown 144 -60
PDH6 Copper Hills unknown 88 -60
PDH7 Copper Hills unknown 110 -60
PDH8 Copper Hills unknown 52 57 -60
Mine Dump XRF Analysis
Portable XRF readings were taken on selected samples from the mine dumps at Copper Hills and
Copper Hills West. The results indicate enrichment in copper, silver and indium.
Table 1 Ocean Resources Copper Hills drill location and survey. Coordinates in GDA2020 zone 55.
ASX code:GG1 Contact: Quentin Hill – Managing Director
Web: greengoldminerals.com.au Email: qhill@greengoldminerals.com
GREEN & GOLD MINERALS
Page 6
Much of the material on the mine dumps was from the oxide and supergene zone as evidenced by
oxide zone copper minerals malachite, azurite and chalcocite.
The XRF results show strong indium enrichment in mine dump samples. Indium is on QLD’s critical
mineral list and used in AI chips and display screens. Indium was not assayed for in historic drilling and
its presence boosts the economic potential of the prospect.
Mine dump sample XRF results are reported in Table 2 as follows:
Sample Easting Northing Cu Ag In Sn Pb Zn Bi As
% g/t g/t % % % g/t %
X001 291947 8072680 0.03% 0 24 0.01% 0.28% 0.03% 0 0.09%
X002 291922.5 8072619 0.00% 0 19 0.01% 0.37% 0.01% 25 0.46%
X003 291510.5 8072567 4.81% 63 454 0.34% 0.67% 0.28% 129 0.14%
X004 291465.8 8072607 18.40% 172 100 0.02% 0.18% 0.05% 105 0.07%
X005 291469.3 8072613 0.12% 0 41 0.02% 0.05% 0.01% 185 0.04%
X006 291465.5 8072635 4.53% 0 48 0.01% 0.06% 0.08% 0 0.00%
X007 291470.9 8072629 2.97% 0 19 0.31% 0.00% 0.01% 158 0.00%
X008 291471.9 8072630 3.24% 57 52 0.01% 0.05% 0.10% 19 0.01%
X009 291548.7 8072639 0.25% 0 18 0.01% 0.21% 0.18% 6 0.02%
X010 291548.7 8072639 9.86% 0 44 0.14% 0.16% 0.39% 18 0.01%
X011 291549.7 8072640 4.61% 0 22 0.01% 0.09% 0.14% 3 0.00%
X012 291836.3 8072744 0.48% 0 11 0.00% 1.00% 0.01% 0 0.54%
X013 291839.9 8072740 12.39% 240 43 0.01% 1.24% 0.02% 0 0.02%
X014 291841.7 8072731 16.18% 157 83 0.04% 3.99% 1.23% 0 1.81%
X015 291842.7 8072732 0.05% 0 20 0.01% 0.31% 0.01% 4 0.01%
X016 291843.7 8072733 17.36% 421 225 0.03% 1.46% 0.21% 2181 0.13%
X017 291845.3 8072731 4.38% 129 94 0.02% 0.69% 0.12% 86 0.00%
X018 291859.6 8072716 0.31% 46 47 0.08% 1.07% 0.02% 64 0.04%
X019 291956.6 8072690 1.24% 98 67 0.14% 2.11% 0.16% 130 0.51%
X020 291961.6 8072691 1.44% 142 52 0.03% 1.78% 0.05% 170 0.45%
X021 291983 8072679 8.44% 0 105 0.06% 0.38% 0.07% 0 5.24%
X021A 291983 8072679 1.96% 486 774 0.17% 0.75% 0.03% 2145 2.90%
X022 292036.8 8072611 0.92% 0 10 0.00% 0.54% 0.02% 16 0.00%
X023 292037.8 8072612 0.03% 0 21 0.01% 0.05% 0.01% 0 0.00%
X024 292324.7 8072526 1.11% 104 28 0.01% 0.27% 0.10% 0 0.29%
X025 292302 8072557 35.32% 60 281 0.02% 0.29% 0.09% 21 0.30%
X026 292283.4 8072602 0.09% 49 32 0.01% 0.25% 0.03% 118 0.33%
X027 292284.4 8072603 0.00% 0 12 0.00% 0.01% 0.01% 0 0.01%
Copper Hills Geology and Mineralisation
The main line of workings at Copper Hills consists of 9 mine shafts over 260m of strike targeting a high
grade vein of ~1m width that strikes to the SSE and dips at 65 – 75 degrees to the WSW. The selvedge
of the main vein was observed in places to contain unmined thinner subsidiary veins and vein
stockwork that decreased in intensity with distance from the main vein. Historic mining is reported to
have reached a maximum of 76m depth and more commonly 30m depth (Grieves, G, 1980).
The wider Copper Hills field is ~1000m x 1000m with several veins and stockwork zones (Figure 2).
A vegetation anomaly is evident around the Copper Hills workings. Vegetation anomalies commonly
occur over outcropping copper mineralisation, caused by copper in the soil stunting plant growth.
Table 2 Copper Hills portable XRF results. Coordinates in GDA2020, zone 55K.
ASX code:GG1 Contact: Quentin Hill – Managing Director
Web: greengoldminerals.com.au Email: qhill@greengoldminerals.com
GREEN & GOLD MINERALS
Page 7
The host rock at Copper Hills is sandstone of the Hodgkinson Formation. Mineral deposits in the copper
zone of the Herberton Mineral Field are related to fertile granites that underlie the Hodgkinson
Formation sediments (intrusion related systems). Mineralisation in the Herberton Mineral Field
commonly occurs as veins, sheeted vein arrays, breccias, and vein stockworks above the granite
contact, as well as massive greisen at the granite–sediment contact.
More than 30 historic mine shafts were identified at Copper Hills during fieldwork. Copper oxide zone
minerals, including malachite and azurite, were commonly observed on the mine dumps and along the
walls of the shafts. XRF analysis indicates that the copper oxide zone begins approximately 1–2 m
below surface, with copper depletion commonly observed in gossan outcrops at surface.
Figure 3 Copper Hills main line of workings looking SSE.
ASX code:GG1 Contact: Quentin Hill – Managing Director
Web: greengoldminerals.com.au Email: qhill@greengoldminerals.com
GREEN & GOLD MINERALS
Page 8
Figure 4 Examples of stockwork veins – Left: vein stockwork in a rock on the mine spoil dump.
Right: Outcropping stockwork quartz veins outside of the historically mined vein.
Figure 5 Left: malachite on the mine dump at the main line of workings at Copper Hills. Right: A
shallow pit into a gossan with malachite starting 1m below surface (Copper Hills West).
ASX code:GG1 Contact: Quentin Hill – Managing Director
Web: greengoldminerals.com.au Email: qhill@greengoldminerals.com
GREEN & GOLD MINERALS
Page 9
Figure 6 A mine shaft at the main line of workings at Copper Hills.
ASX code:GG1 Contact: Quentin Hill – Managing Director
Web: greengoldminerals.com.au Email: qhill@greengoldminerals.com
GREEN & GOLD MINERALS
Page 10
Penang Pekin Mine Sampling
The Penang Pekin area was sampled during April 2026 and has emerged as a strong exploration target
for copper, silver and indium.
Penang Pekin is part of the Elizabeth Bluffs group of mines which historically produced copper, tin and
gold. Historic workings consist of mine adits clearly visible on hillsides (Figure 8).
Historic rock chip sampling at Penang Pekin by Dominion Mining returned up to 4.8% Cu, 4.68 g/t Au,
230 g/t Ag (historic rock chip results announced on 4 Feb 2026: ASX:GG1 - Future Facing Metals
Acquisition Ag-Cu-Sn-Au-In). Only part of the Penang Pekin area was inspected and sampled during the
recent site reconnaissance. More work is required to assess the whole 4km long Elizabeth Bluffs area,
which is a large scale target for the discovery of copper, silver, tin, indium and gold mineralisation.
Figure 7 Left: gossanous vein material from the main line of workings – XRF: 1.4% Cu, 142 g/t
Ag, 52 g/t In. Right: malachite and azurite on the mine dumps, far eastern vein at Copper Hills.
ASX code:GG1 Contact: Quentin Hill – Managing Director
Web: greengoldminerals.com.au Email: qhill@greengoldminerals.com
GREEN & GOLD MINERALS
Page 11
Four parallel vein trends were identified within an 80m wide corridor over 450m of total strike. Three of
the vein trends host historic mines. Malachite was common in waste rock on the mine dumps, on the
walls of the historic mines and in some areas, on un-mined rock outcrops.
Figure 8 Left: Penang Pekin vein locations, XRF copper results and historic rock chip results.
Right: A view of the hill hosting the Penang Pekin workings looking SE, showing the mine adits
and waste dumps with approximate vein locations marked.
Figure 9 Examples of green malachite (copper carbonate) in rocks from the mine dumps.
ASX code:GG1 Contact: Quentin Hill – Managing Director
Web: greengoldminerals.com.au Email: qhill@greengoldminerals.com
GREEN & GOLD MINERALS
Page 12
The historic mines are developed on 0.5m to 1.5m wide vein zones that are hosted in Hodgkinson
formation sandstone. Each mined vein consists of multiple ~1cm wide quartz-sulphide sheeted veins.
Occasional sheeted veins were observed in country rock decreasing in abundance with distance from
each of the main veins. Stockwork veining was commonly observed in the host rock immediately
adjacent to the historically mined veins and in isolated locations away from the historically mined veins
within the 80m wide southeast trending mineralised corridor.
Portable XRF readings were taken on veins that were exposed in the historic mine adits. The XRF
results indicate that the key target metals; copper, silver and indium are present at Penang Pekin.
Rock chip samples were taken and submitted for gold and multielement assay.
Sample Easting Northing Cu Ag In Sn Pb Zn Bi As Sb
% g/t g/t % % % g/t % %
X028 292175.7 8072854 0.00% 45 31 0.03% 1.52% 0.17% 0 0.82% 0.05%
X029 296853.9 8072830 0.03% 0 51 0.01% 0.71% 0.03% 0 0.69% 0.01%
X030 296857.8 8072827 0.01% 0 37 0.00% 0.28% 0.02% 0 1.50% 0.01%
X031 296858.8 8072828 0.04% 41 40 0.02% 3.45% 0.06% 0 4.89% 0.04%
X032 296915.5 8072781 7.65% 188 304 0.02% 3.33% 0.04% 624 1.98% 0.06%
X033 296925.6 8072739 29.76% 47 74 0.01% 6.03% 1.93% 0 1.79% 0.45%
X034 296912 8072656 13.09% 62 77 0.02% 1.09% 0.35% 61 0.03% 0.03%
X035 296913 8072657 1.19% 0 60 0.01% 0.15% 0.04% 0 0.00% 0.00%
X036 296923.2 8072633 4.27% 0 105 0.01% 0.64% 0.12% 0 3.00% 0.03%
X037 296923.2 8072633 0.65% 0 58 0.00% 2.90% 0.69% 30 0.08% 0.01%
X038 296924.2 8072634 3.17% 47 38 0.01% 1.02% 8.37% 0 0.06% 0.00%
X039 296985 8072669 0.50% 49 51 0.01% 0.30% 0.05% 11 0.18% 0.03%
X040 296986 8072670 5.96% 134 107 0.02% 0.14% 0.08% 58 0.09% 0.02%
Figure 10 Left: Malachite (copper carbonate) on the entry to an historic mine (the mine adit
entry is to the right out of frame). Right: a gossanous, malachite and azurite coated vein in a
mine adit.
Table 3 Portable XRF results at Penang Pekin from vein exposures in mine adits.
ASX code:GG1 Contact: Quentin Hill – Managing Director
Web: greengoldminerals.com.au Email: qhill@greengoldminerals.com
GREEN & GOLD MINERALS
Page 13
Several historic mines in the Elizabeth Bluffs area reported gold as either a primary or secondary
commodity mined. Historic miners generally did not take the top 5m below surface, preferring to sink
shafts to access rock deeper in the oxide, supergene and fresh rock zones.
Outcrops of stockwork quartz and sheeted veins were located near the vein trends where erosion had
removed the soil and exposed the rock (Figure 12).
Figure 11 Left: Mine adit developed on a 1.5m wide vein with lesser stockwork and sheeted
veins evident in selvedge of the mined out vein. Right: At the entrance of a mine adit developed
on a 1m wide vein with malachite and azurite coating the mine walls and roof.
ASX code:GG1 Contact: Quentin Hill – Managing Director
Web: greengoldminerals.com.au Email: qhill@greengoldminerals.com
GREEN & GOLD MINERALS
Page 14
Figure 12 Vein stockwork in sandstone outcrop outside of the historically mined veins.
Figure 12 Left: Close up of a mine adit showing malachite on rocks that had fallen from the
roof. Right: A mine entry adit on a 1.5m wide vein (same mine adit as the close up photo - Left).
ASX code:GG1 Contact: Quentin Hill – Managing Director
Web: greengoldminerals.com.au Email: qhill@greengoldminerals.com
GREEN & GOLD MINERALS
Page 15
Mt Gossan and Siberia
GG1 has identified the Mt Gossan–Siberia trend as the highest-priority target for discovery of a
significant copper, silver, tin, and indium deposit.
GG1 has now digitised soil sample data from historic exploration reports. The soil data defines a near-
continuous Cu–Sn–As–Pb anomaly extending over 5 km in length and up to 500 m in width (Cu, Sn, As,
and Pb were the only elements assayed in historic soil sampling). The copper soil anomaly (shown
below in Figure 13) is continuous over 5km >100ppm Cu threshold and reaches a peak of 4380ppm
Cu. This anomaly is coincident with the historic mines along the Mt Gossan–Siberia trend. The area has
not been explored for 45 years, with the last drilling conducted in 1980, well before the recent increase
in interest in copper, silver, tin, and indium driven by electrification and AI.
Shallow historic drilling at Mt Gossan and Siberia comprises 31 holes to an average depth of only 30m,
with the best intercept reported as 8 m at 2.58% Cu, 39 g/t Ag, and 0.32% Sn¹. Mineralisation is
largely continuous and consistent. GG1 interpretation of historic drilling data identified only 2 holes out
of 31 where target depth was achieved but failed to intersect significant mineralisation and lode
structures.
There is strong potential for indium at Mt Gossan–Siberia. Gold and indium were not assayed in historic
drilling but are present in historic rock chip assays. Indium rock chip assays from the Mt Gossan area
have returned grades of up to 1,620 g/t In¹.
Work at Mt Gossan–Siberia is scheduled to commence in May 2026, once the access track is
reinstated. The access track to the historic mine workings has deteriorated over time and requires
grading and minor earthworks.
Figure 13 The 5km long copper in soil anomaly at the Siberia – Mt Gossan mines.
1
Results contained in announcement 4 Feb 2026: Future Facing Metals Acquisition Ag-Cu-Sn-Au-In
5km
ASX code:GG1 Contact: Quentin Hill – Managing Director
Web: greengoldminerals.com.au Email: qhill@greengoldminerals.com
GREEN & GOLD MINERALS
Page 16
Next Steps
Drilling is planned to commence at Copper Hills in May 2026, after which the drill rig will relocate to
Chillagoe to test targets at Sentinel and Mt Wandoo.
Access to Mt Gossan and Siberia will be established during May. Drilling at Mt Gossan and Siberia is
planned to follow the completion of drilling at Chillagoe.
Reconnaissance fieldwork at the Herberton Conductor Metals Project is currently focused on
EPM27232, as it contains the largest historic copper-silver mines. Reconnaissance work at EPM27229
is expected to commence in May 2026.
Work on the Mt Wandoo gold development is ongoing, with modelling and studies progressing.
GG1 exploration results announcements for the Herberton Conductor Metals Project:
4 February 2026: Future Facing Metals Acquisition Ag-Cu-Sn-Au-In
This announcement was approved for release by the board of Green & Gold Minerals Ltd.
About the Herberton Conductor Metals Project:
The project is situated in a prolific historic
mining area located 100km west of Cairns, QLD.
The project lies within the Cu-Ag-Sn-In metal
zone, elements that are leveraged to future
facing electrification and AI data centre metal
demand. The tenements are unexplored in the
modern era and have high discovery potential.
The Company plans to emulate the success of
neighbouring explorers that have recently
delineated large resources from the prolific
mineral occurrences found across this region.
ASX code:GG1 Contact: Quentin Hill – Managing Director
Web: greengoldminerals.com.au Email: qhill@greengoldminerals.com
GREEN & GOLD MINERALS
Page 17
About the Chillagoe Gold Project:
The Chillagoe Gold Project is located 25km
northwest of Chillagoe in north Queensland
adjacent to the significant Red Dome and Mungana
gold deposits. The project contains an inferred
JORC Resource1 of 32,400oz Au and 387,000oz Ag
at 1.1g/t Au and 13 g/t Ag within granted mining
leases at Wandoo.
Recent drill results include 6m at 11.1 g/t Au and
281 g/t Ag, 9m at 7.9g/t Au and 51 g/t Ag and 19m
at 2.9 g/t Au. Drill results announcement: here
The Company has a dual focus of extending the
Wandoo resource in preparation for mining studies,
while exploring for new gold discoveries in the
Mungana porphyry cluster.
COMPETENT PERSON’S STATEMENT
The information in this Announcement that relates to Exploration Targets and Exploration Results is based upon work
undertaken by Mr Quentin Hill who is a Member of the Australasian Institute of Geoscientists (AIG). Mr Hill has sufficient
experience that is relevant to the style of mineralisation and type of deposit under consideration and to the activity which he
is undertaking to qualify as a ‘Competent Person’ as defined in the 2012 Edition of the ‘Australasian Code for Reporting of
Exploration Results, Mineral Resources and Ore Reserves’ (JORC Code). Mr Hill is an employee of Green & Gold Minerals
and consents to the inclusion in the report of the matters based on their information in the form and context in which it
appears.
The information that relates to Mineral Resources and Historic drill hole intersections were previously reported by the
Company in its Prospectus, a copy of which is available on the Company’s website at
https://www.greengoldminerals.com.au/investors/asx-announcements/. The Company is not aware of any new information
or data that materially affects the information included in this announcement and that all material assumptions and
technical parameters underpinning the estimates continue to apply and have not material changed. The Company confirms
that the form and context in which the Competent Person’s findings are presented have not been materially modified from
the original market announcement.
ASX code:GG1 Contact: Quentin Hill – Managing Director
Web: greengoldminerals.com.au Email: qhill@greengoldminerals.com
GREEN & GOLD MINERALS
Page 18
References
Kumar, A and others, 2022: The geological setting of the indium-rich Baal Gammon and Isabel Sn-Cu-
Zn deposits in the Herberton Mineral Field, Queensland, Australia. Avish A. Kumar, Ioan V. Sanislav,
Paul H.G.M. Dirks, October 2022.
Grieves, G, 1980: (CR14795) Copper Hills Emuford Area, North Queensland. Grieves, G, March 1980.
ASX code:GG1 Contact: Quentin Hill – Managing Director
Web: greengoldminerals.com.au Email: qhill@greengoldminerals.com
GREEN & GOLD MINERALS
Page 19
JORC Table 1
Section 1 Sampling Techniques and Data: portable XRF results
Criteria JORC Code explanation Commentary
Sampling
techniques
• Nature and quality of sampling (eg cut
channels, random chips, or specific
specialised industry standard measurement
tools appropriate to the minerals under
investigation, such as down hole gamma
sondes, or handheld XRF instruments, etc).
These examples should not be taken as
limiting the broad meaning of sampling.
• Include reference to measures taken to
ensure sample representivity and the
appropriate calibration of any measurement
tools or systems used.
• Aspects of the determination of
mineralisation that are Material to the Public
Report.
• In cases where ‘industry standard’ work has
been done this would be relatively simple.
• Portable XRF results at Copper Hills and Penang Pekin are spot
measurements of rock fragments from the mine dumps and from
exposures in mine shafts and adits. These measurements do not
represent averages of the mineralisation.
• Historic soil results at Mt Gossan – Siberia were collected by Loloma
Mining in 1980. There is no record of the sampling technique used by
Loloma Mining.
Drilling
techniques
• Drill type (eg core, reverse circulation, open-
hole hammer, rotary air blast, auger, Bangka,
sonic, etc) and details (eg core diameter,
triple or standard tube, depth of diamond
tails, face-sampling bit or other type, whether
core is oriented and if so, by what method,
etc).
• Historic drill results at Copper Hills by Ocean Resources were drilled with
a Schramm percussion rig at 14cm hole diameter with chip return via the
open hole and water injection used to return chips when water was
encountered.
Drill sample
recovery
• Method of recording and assessing core and
chip sample recoveries and results assessed.
• Measures taken to maximise sample recovery
and ensure representative nature of the
samples.
• Whether a relationship exists between sample
recovery and grade and whether sample bias
may have occurred due to preferential
loss/gain of fine/coarse material.
• Historic drill chip recovery at Copper Hills by Ocean Resources was noted
to be variable and poor at times ranging from as low as 20% up to 100%.
Uphole sample contamination from the collar was noted in some holes.
The drill results are not suitable for use in any future resource estimate.
Logging • Whether core and chip samples have been
geologically and geotechnically logged to a
level of detail to support appropriate Mineral
Resource estimation, mining studies and
metallurgical studies.
• Whether logging is qualitative or quantitative
in nature. Core (or costean, channel, etc)
photography.
• The total length and percentage of the
relevant intersections logged.
• Ocean Resources logged the complete length of all drill holes for
lithology, weathering and water at Copper Hills.
Sub-
sampling
techniques
and sample
preparation
• If core, whether cut or sawn and whether
quarter, half or all core taken.
• If non-core, whether riffled, tube sampled,
rotary split, etc and whether sampled wet or
dry.
• For all sample types, the nature, quality and
appropriateness of the sample preparation
technique.
• Quality control procedures adopted for all sub-
sampling stages to maximise representivity of
samples.
• Measures taken to ensure that the sampling
is representative of the in situ material
collected, including for instance results for
field duplicate/second-half sampling.
• Whether sample sizes are appropriate to the
grain size of the material being sampled.
• Ocean Resources subsampled chips by recovering 1m samples of up to
23kg from the cyclone into drums which were then subsampled to derive
1kg assay samples using a splitter.
• Ocean Resources outlined their view that percussion drilling is not
Share your feedback
Discover